FEBRUARY 05
The engine was already been removed by the previous owner. So all the bolts came off very easly. The exhaust manifold look in ugly shape but after a good cleaning/painting job they will look perfect. I just have to inspect the valve on the pass side manifold (this valve closes the manifold when the engine is cold). I'm not sure it will work properly.
Pass side intace maniforld with valve Intake manifold
The heads went away as easy as the manifold. They appear in a very good shape. Just some surface rust on the outside. All fixable with a small amount of work. I'll send the heads to the machine shop later.
Heads out of the engine
The engine in the car